Showing posts with label Starting Blocks. Show all posts
Showing posts with label Starting Blocks. Show all posts

Sunday, November 15, 2026

FROM DUG HOLES TO STARTING BLOCKS

The Evolution of the Sprint Start in Athletics

Athletics is often described as the queen of sports, and among its many events, the sprint holds a special place in the imagination of spectators. The 100 metre race, in particular, is one of the most eagerly awaited contests at an athletics meet. It is a brief but thrilling test of speed, strength, technique and reaction, producing the athlete who earns the distinction of being the fastest man or woman of the competition. Few sporting achievements capture the public imagination quite like the sight of a sprinter crossing the finish line first. Usain Bolt, whose extraordinary performances made him a global sporting icon, brought this excitement to millions around the world.

Yet, behind every sprint victory lies a moment that lasts barely a few seconds: the start. Before an athlete can display speed and strength over the track, there is the challenge of leaving the starting line with the greatest possible acceleration.

The way sprinters begin a race has changed remarkably over the years. In the early days of organised athletics, runners had no adjustable starting blocks or electronic systems. Instead, they relied on simple, improvised footholds on the track to gain a firm push off when the starter's signal came. From these humble beginnings emerged the sophisticated starting blocks and electronic systems of modern athletics. It is a story of how a small change in equipment transformed one of the most decisive moments in a sprint.

Before the starting blocks

In the early days of organised athletics, runners had no mechanical support at the starting line. On grass, earth and cinder tracks, athletes often dug small holes in the ground with their feet to provide a firm foothold. These improvised depressions enabled them to brace their legs and push forward when the starting signal was given.

The practice was simple, but it had limitations. The firmness of the ground varied from one track to another, and even from one part of the same track to another. A hole dug in hard ground might provide a different degree of support from one made in loose soil or soft cinders. Athletes also had to prepare their own footholds before the race, sometimes leaving the track uneven or damaged.

The starting position itself gradually evolved. Runners experimented with placing their feet at different distances from the starting line, bending their knees and lowering their bodies to improve their initial acceleration. The crouch start, which brought the athlete closer to the ground and allowed a more forceful push from the legs, gradually gained acceptance. It was a significant departure from the more upright starting positions used by many earlier runners.

The underlying principle was already clear: the first movement could influence the entire race. A powerful and balanced start could help a sprinter build speed quickly, while a poor start could leave the athlete struggling to recover lost ground. The search for a more reliable foothold eventually encouraged the development of mechanical starting supports.

The crouch start changes sprinting

The starting block was only one part of a wider transformation in sprinting. The development of the crouch start had already begun to change the way athletes approached short distance races. American sprinter Charles Sherrill is often credited with popularising the crouch start in 1888. Instead of standing upright, the runner bent low, placed the hands close to the starting line and positioned the feet to generate a strong forward drive. The technique gradually gained acceptance, although it took time for coaches and athletes to agree on the most effective position.

The crouch start offered a more effective way to overcome the body's inertia at the beginning of a sprint. But without a firm and dependable support for the feet, athletes still had to rely on holes dug into the track. The mechanical starting block would eventually provide that support in a more consistent form.

The early experiments and the invention

The history of starting blocks is more interesting than the familiar account that they were simply invented in 1927. A World Athletics feature published on 20 May 2026 notes that starting blocks had appeared as early as February 1910, at the Irish - American indoor games in New York. Digging holes was not an option on a wooden indoor track, which makes portable foot supports an obvious fit.

Another important contribution came from the Japanese athlete Kinue Hitomi. Her 1926 book, “The Latest Methods of Women's Track and Field Athletics”, written when she was only 19, contained a detailed illustration of starting blocks. World Athletics describes it as the earliest known technical depiction of the device, a year before Bresnahan's patent application. Hitomi was not only an outstanding athlete but also a thoughtful student of technique, and her illustration shows the idea was being explored well beyond the United States.

The name most commonly associated with the adjustable starting block is that of the American coach George T. Bresnahan, credited together with William Tuttle with a design of 1927 that let runners brace their feet against adjustable supports.
 The patent, issued in Bresnahan's name, was filed on 29 April 1927 and granted on 5 February 1929. The application explained the problem with the old method: the firmness of soil and cinders varied greatly, so dug footholds were often unreliable.

The new device did not conquer the sport overnight. The IAAF explicitly banned starting blocks in 1935, then authorised them in 1938 with restrictions, as a way to protect the track and speed up the programme rather than as an aid to the runner. The rule book that followed reproduced Bresnahan's design and named him as the inventor.

Acceptance by the athletics authorities

The introduction of starting blocks was not immediately welcomed by everyone. The equipment had to find acceptance within the rules of organised athletics, and its purpose and place in competition needed to be established.

The International Amateur Athletic Federation (IAAF), now known as World Athletics, initially resisted their use. Starting blocks were explicitly banned in 1935. In 1938, however, the IAAF authorised them under restrictions. Interestingly, the stated purpose was not primarily to give runners a competitive advantage. The blocks were permitted to protect track surfaces from repeated digging and to help competitions proceed more efficiently.

This episode is a reminder that sporting innovations are not always accepted immediately. A device that is now regarded as essential equipment once had to overcome doubts about its purpose, fairness and place in the rules of competition.

The 1948 London Olympic milestone

The 1948 London Olympic Games marked a decisive moment in the history of the sprint start. Starting blocks were used in Olympic sprint events for the first time. Those Games also witnessed important developments in athletics timing technology, including the first use of photo finish technology at the Olympic Games. These innovations reflected the growing importance of precision in the measurement and administration of athletic performances.

The contrast with earlier Olympic competitions was striking. At the 1924 Paris Olympics, sprinters still had to prepare their own footholds on the track, using small trowels to dig holes from which to start. Among the Indian athletes competing at Paris was C. K. Lakshmanan of Kannur, the first Malayali to participate in the Olympic Games. He represented British India in the 110 metre hurdles. By the 1948 London Olympics, mechanical starting blocks had made their Olympic debut, marking an important change in the way athletes prepared for the race.

Following their introduction at London, starting blocks were used at all subsequent Olympic Games. Their use gradually spread through major international competitions and they eventually became an established feature of high level sprinting.

How the starting technique evolved

Starting blocks did more than replace the old footholds. They gave sprinters a firm, stable platform that allowed them to adjust their foot positions and body posture for a stronger start.

Over time, three common starting positions developed: the bunch start, the medium start and the elongated start. They differ mainly in the distance between the feet on the blocks. No single position suits every athlete. Leg length, strength, flexibility and personal comfort all influence the choice. The athlete and coach work together to find a position that provides a powerful push and allows a smooth transition into the first strides.

The starting procedure also became standardised. The familiar commands, "On your marks" and "Set", guide athletes into position before the starting signal. In the set position, the hands remain behind the starting line, the feet press against the block plates and the hips are raised in readiness to drive forward.

The first few steps are crucial. A sprinter must push firmly against the blocks, move the body forward and gradually rise into the running position. Thus, the start and the initial acceleration are closely connected parts of a sprint.

Under World Athletics rules, a crouch start and starting blocks are compulsory in all races up to and including 400 metres. This covers the 100m, 200m, 400m and the hurdles events (100m/110m hurdles and 400m hurdles). In relays, blocks are used only by the first leg runner. Later runners start from the takeover zone without blocks. Races over 400m, such as the 800m, use a standing start. Starting blocks therefore remain an essential feature of sprinting and other short distance track events.

From simple supports to electronic starting systems

Early starting blocks were simple devices with two inclined plates against which runners placed their feet. Over the years, they became stronger, more stable and easier to adjust.

Modern starting blocks are precision equipment. At major competitions where a certified Start Information System is in use, the blocks are fitted with electronic sensors that measure the force exerted by an athlete against the footplates. This information helps officials monitor the start and detect possible false starts.
A false start occurs when an athlete commences the starting movement before receiving the starting signal. When the electronic system records a reaction time of less than 0.100 second, it sends an alert to the officials. This indicates a possible false start, which the starter examines using the reaction time data and other available information before deciding whether an athlete is responsible. The starting blocks have therefore become more than a support for the feet; they are now an important part of race monitoring and officiating.

The rules governing false starts have also become stricter. From 1 January 2010, under the revised rule, any athlete responsible for a false start in an individual race is disqualified immediately. Combined events have a different provision, allowing one false start per race before subsequent offenders are disqualified. This change placed greater emphasis on concentration and discipline at the starting line.

The impact of this rule was dramatically illustrated at the 2011 World Athletics Championships in Daegu, South Korea. In the men's 100-metre final on 28 August, defending champion and world record holder Usain Bolt was disqualified for a false start. Millions watching on television witnessed the shocking moment as Bolt left his starting blocks before the gun was fired. His unexpected exit from the race paved the way for his Jamaican teammate Yohan Blake to win the world title in 9.92 seconds. It remains one of the most memorable false-start incidents in modern athletics.

The science behind the start

The starting block shows how a small piece of equipment can lead to serious scientific study. Sports scientists have studied how sprinters push off, how their knees and hips move, how they hold their body in the “set” position, and how they take their first few steps. When a runner pushes against the blocks, the blocks push back. That push helps launch the runner forward. How hard the athlete pushes, in which direction, and for how long all affect how quickly they can start. Scientists have also looked at whether the distance between the two blocks, and the angle of the blocks, help the runner push more effectively.

A review published in Sports Medicine in 2019 looked at the science of the sprint start, including the time in the blocks and the first steps after leaving them. It shows how a movement that lasts only a tiny fraction of a second has become an important subject of scientific research.

But equipment alone does not make a champion. The starting block cannot replace strength, coordination, technique, reaction, practice and the athlete's ability to accelerate over the distance. It provides a more reliable platform from which these qualities can be expressed.

From the international track to Indian athletics

The adoption of starting blocks gradually changed sprint training around the world. Indian athletics, too, became part of this transition as international competition standards and modern coaching practices influenced the organisation of track events. For Indian sprinters, the change meant moving away from the traditional practice of preparing footholds in the track and learning to use adjustable starting blocks. Coaches increasingly had to teach correct foot placement, the set position, the first explosive movement and the acceleration phase.

The precise date when starting blocks first became common in Indian domestic competitions deserves further archival research. The same holds true for Kerala’s own athletics history. In my own district, I first saw and used starting blocks while studying in the eighth standard at Kendriya Vidyalaya. Our school athletic team captain, M. V. Prakash, who was also a Kerala state schools pole vault champion, and his younger brother Devaprasad, a district school sprint champion in the Junior Boys category, used both starting blocks and spikes. As I remember it, the two brothers were responsible for introducing this previously unfamiliar combination of starting blocks and spiked shoes into the Kozhikode District Inter-School Athletic Meet. While many sprinters from other schools began their races from the more traditional upright position, these two KVites adopted the crouched start, with their feet braced against the starting blocks. This enabled them to push firmly against the footplates and drive forward from the line. It was a striking contrast in technique, and the advantage it offered soon became evident.

In subsequent years, my classmate and close relation, our ace Kerala state sprinter K. P. Ashok Kumar, also produced his best performances in the 100 metres with the aid of starting blocks and spikes. The adoption of this equipment and technique may well have been an important factor in the remarkable achievement of our school, whose athletes emerged as district champions in the boys' 100 metre event for seven consecutive years, from 1967 to 1973. Credit for these achievements should also go to the school's two physical education teachers, Charles Sushil Kumar, who served first, and Sugathan, who joined the school later. Their guidance and contribution played an important part in shaping the school's success in athletics.

Later, in my capacity as a qualified Amateur Athletic Federation of India official, I had the opportunity to witness at close quarters the advantages of starting blocks in competitive athletics.

A revolution that began at the starting line

From the holes dug by runners in clay and cinder tracks to the sophisticated electronic starting blocks of today, the evolution of the sprint start reflects the larger development of athletics itself. What began as a practical search for a firm foothold became an innovation that changed technique, coaching and competition. The starting block may appear to be a small piece of equipment beside the running track. Yet it has transformed one of the most decisive moments in a sprint. It has given athletes a more dependable platform, coaches a means to refine technique and officials a technological aid to ensure fairness.

Today, when sprinters settle into their blocks at an Olympic final, the thousands watching may be thinking about world records, medals and the athletes poised to make history. Few may remember that, barely a century ago, competitors carried trowels to the starting line.

The journey from dug holes to starting blocks is a reminder that even the smallest changes in sport can have a lasting influence. Sometimes, a revolution does not begin at the finish line. It begins with the first step.

References

  1. World Athletics. “Early Origins to 1930s - History and Heritage.”
  2. World Athletics. “Three Reasons Kinue Hitomi’s Century-Old Women’s Athletics Book Still Matters.” 20 May 2026.
  3. United States Patent Office. George T. Bresnahan, Foot Support, US Patent 1,701,026, filed 29 April 1927; granted 5 February 1929.  International Olympic Committee.
  4. “Technological Innovations – London 1948.”
  5. World Athletics. “1924 to 2024: Equipment and Technology.”
  6. Bezodis, N.E., Willwacher, S. and Salo, A.I.T. “The Biomechanics of the Track and Field Sprint Start: A Narrative Review.” Sports Medicine, 49 (2019), pp. 1345–1364. DOI: 10.1007/s40279-019-01138-1.
Coming up next: SUNDAY FIELD & FLAME – 22 November 2026 - VOLLEYBALL: A JOURNEY OF CHANGE AND EXCELLENCE

FROM DUG HOLES TO STARTING BLOCKS

The Evolution of the Sprint Start in Athletics Athletics is often described as the queen of sports, and among its many events, the sprint ho...